![background image](http://html.mh-extra.com/html/kato/premium-cityrange-cr-200rf/premium-cityrange-cr-200rf_instruction-manual_657900307.webp)
- 278 -
24. Crane operation
Never slew the crane when the safety level bar graph indicator is in the red zone, indicating the
crane is overloaded. If outriggers are extended to different lengths, crane capacity can vary
significantly depending on the slewing position. Forgetting this point and slewing the crane even
when the safety level bar graph indicator is in the red zone can result in the crane tipping over and
causing a major accident. If the voice warning message "Danger maximum lifting capacity" is
emitted and the safety level bar graph is in the red zone, stop slewing as quickly as possible, while
being careful of load swing.
(541A-0238-1E)
(3) If slewing does not stop even after slewing into the slew-restricted region
If the crane is level and a "slew-restricted region" has been specified in the ACS, yet slewing does not automatically
decelerate when approaching the restricted region and does not stop when slewing reaches the restricted region,
use the following procedure to operate the crane and avoid danger.
1)
If slewing does not automatically slow down as it approaches the "slew-restricted regions" indicated on the ACS
screen, move the slewing control lever to the neutral position, while keeping a close watch on the load
movement, and let the engine idle.
2)
If slewing doe not decelerate adequately and appears as though slewing will not stop before entering the
restricted region, forcibly stop the slewing motion by operating the lever in the opposite direction, being careful
not to let the load swing.
3)
If it is necessary to slew close to the restricted region, double-check the distance to any obstructions and slowly
and cautiously slew the crane to the desired position.
(4) Warning sounds and voice warnings emitted when slewing while overloaded or within a restricted region
If the associated danger is ignored and the crane is slewed when overloaded or into a restricted region, a voice
warning, warning chime or emergency sound is emitted depending on how overloaded the crane is or how far it
has slewed into the restricted region, to warn the operator of the extremely dangerous state.
1)
Voice warning, warning chime or emergency sound emitted
depending on extent of overload
If slewing does not stop automatically at the correct position, but
overruns the overload point, due to a "slewing stop system"
malfunction, unlevel machine or strong winds, a voice warning,
warning chime or emergency sound is emitted, according to how
overloaded the crane is, to notify the operator of the danger.
In addition, even if slewing is reversed to escape the danger, the
warning sound will continue until the crane is no longer
overloaded.
Summary of Contents for PREMIUM CITYRANGE CR-200RF
