Transmitter:
1. Turn the power switch to the ON direction. When the power indicator is off, replace the battery.
2. After the power is turned on, the ultrasonic transmitter continuously emits an ultrasonic signal.
3. After use, turn off the power by turning the power switch to the OFF direction.
Physical Structure:
Notes:
Receiver:
1. Do not collide with other things
2. Do not disassemble by yourself
3. Do not touch water
4. Please avoid using the computer near electromagnetic waves, etc., otherwise the instrument will
misjudge the product.
5. If the instrument is not used for a long time, remove the battery.
6. Do not use the instrument for the detection of flammable, explosive gases or liquid leaks.
7. If the pressure inside the pipe or container is insufficient or the leak is too large, the instrument may
not be able to detect
8. After the receiver is in contact for 10 hours, it is recommended to replace the battery.
Transmitter:
1. Do not collide with other things
2. Do not disassemble by yourself
3. Do not touch water
4. Since the signal generator will generate ultrasonic waves in all directions, all the emitters must be
placed in the completely closed object to be measured
5. Ultrasonic signals will produce total reflection at right angles of the pipe and will not propagate
6.
Do not use the instrument near flammable or explosive other vapors or dust.
