w w w . k a u
-9-
b e r . e u
End positions adjustment (screen with built-in radio control – engine type "C-RTS")
Correcting the
bottom
end position:
1.
Using the remote control button
UP
set the roller-blind in the top end position.
2.
At the same time, press and hold for more than 5 seconds buttons
UP
and
DOWN
. The drive
moves briefly up / down.
3.
Using the buttons
UP
,
DOWN
,
STOP
, set the roller-blind in the new end position.
4.
Press and hold the button
STOP
for more than 2 seconds The drive moves briefly up / down
Fig. 12
Correcting the
bottom
end position:
1.
Using the remote control button
DOWN
set the roller-blind in the bottom end position.
2.
At the same time, press and hold for more than 5 seconds buttons
UP
and
DOWN
. The drive
moves briefly up / down.
3.
Using the buttons
UP
,
DOWN
,
STOP
, set the roller-blind in the new end position.
4.
Press and hold the button
STOP
for more than 2 seconds The drive moves briefly up / down
Fig.13
