1-2 GENERAL INFORMATION
_______________________________________________________________________
Copyright © 2011 by Kaufman & Robinson, Inc., 1330 Blue Spruce Drive, Fort Collins, CO 80524
Tel: 970-495-0187, Fax: 970-484-9350, Internet: www.ionsources.com
DISCHARGE POWER SUPPLY MANUAL
MODEL DC3005, MODEL 30010, MODEL 15012
inson, Inc.
1.3 Specifi cations
The following speci
fi
cations pertain to the Kaufman & Robinson, Inc., Discharge
Power Supply, Models DC30010, DC3005, and DC15012
1.3.1 Dimensions
The Power Supply is designed to be mounted in a standard 19-inch (48.3 cm)
rack mount cabinet. The height of this Power Supply is 1.75 inches (4.45 cm)
and its depth is approximately 21 inches (53.3 cm).
1.3.2 Weight
The weight of this unit is 7.27 kg (16 pounds).
1.3.3 AC Input
The input voltage for the Discharge Power Supply is 85-275 volts ac single
phase at 50-60 Hz. The maximum input current to the unit is electronically
limited to 28 amps RMS. Operation at lower line voltages may be limited by
outlet capacity and/or circuit breakers.
1.3.4 DC Output
The maximum output for the DC30010 model of this Power Supply is 300
VDC and 10 amps. Operation at this level is limited by thermal protection.
Continuous duty operation is speci
fi
ed at 2000 watts up to 40
˚
C ambient air
temperature.
The maximum output for the DC3005 model of this Power Supply is 300
VDC and 5 amps. Operation at this level is limited by thermal protection.
Continuous duty operation is speci
fi
ed at 1500 watts up to 40
˚
C ambient air
temperature.
The maximum output for the DC15012 model of this Power Supply is 150
VDC and 12 amps. Operation at this level is limited by thermal protection.
Continuous duty operation is speci
fi
ed at the maximum 2000 watts up to
40
˚
C ambient air temperature.
