Operating Manual
Original Operating Manual
11
4.1.2 Pressure plate toe-in / preload adjustment as necessary and depending on attachment design
Adjust the toe-in (a) or preload (b) by loosening the screws (1).
Use the adjusting screws (2) to set the pressure plate (3) to the desired position.
Torque the screws (1) to 77 Nm.
The maximum clearance between pressure plate (3) and pressure plate support (4)
should be 5mm!
1
1
1
1
1
1
1
4
2
2
2
2
2
2
2
2
3
2
2
2
2
2
2
(a)
(b)
(b)
3
4