Operating Manual
8
Original Operating Manual
3.1
Proper use of the equipment
The beer keg clamp is suitable for taking beer kegs of differing sizes with three forks in two rows,
and to stack and transport them. Multiple layers on top of each other can be transported using
locator boards and a load stabiliser. Taking only one row or one keg on the tip of the forks can be
approved with reduced hydraulic pressure. Make enquiries of the beer keg clamp manufacturer.
Goods can also be transported on pallets.
Proper use of the machine and/or equipment includes the following:
Observance of the operating manual at all times.
Observance of the technical data on the identification plate on the attachment.
Adherence to the specified inspection and maintenance instructions.
3.2
Improper use
Exceeding the allowable load capacity and load centre.
Dragging or pushing loads with the attachment
Transporting persons with the load or load handling devices
Mounting auxiliary equipment on the attachment such that the original mode of usage
is changed, (e.g. fork extensions) must be authorised by the manufacturer.
4.
Installation and checking out
4.1
Installation
Installation and commissioning should be performed by qualified and authorised
personnel only.
Pay attention to a sufficient load-carrying capacity of the lifting means.
The following are examples of preferred lifting means:
Capacity
250 kg/M16
1200 kg/M16
2000 kg/M16
Part-no.
9710160008
0360010201
0360010301
