Operating Manual
Original Operating Manual
21
Daily
Check all lines, hoses and connections for leakage and damage.
After 50h / every 500h thereafter
Check screws:
(4) on the slewing ring (3) / base plate (7).
(
8, 9, 11) on the gear
(10).
(12) on the oil motor (13).
(15) on the upper hooks (16) / intermediate element (2).
(17) on the lower spacer (18) and hooks (19).
(22) on the sideshifter housing (23).
(24) on the lower hooks (25).
Replace loose or damaged screws. Torque the screws as specified in Chapter 6.1
General.
Weekly
Grease:
Sliding pieces (21) by way of the greasing nipples (20).
Supporting rollers (26) on the lower hooks (27) as necessary.
Every 200h
Check wear on:
sliding pieces (21).
supporting rollers (26).
Prevent entry of dirt, water or moisture into the slewing ring.
Grease:
Slewing ring (3) by way of the greasing nipples (14).
Gearing of the slewing ring (3) by way of the greasing nipples (1).
Every 500h
Check the oil level of the gear box (10).
After 2500h / every 2000h thereafter
Change the gear box oil (Information KAUP customer service).
