5
(2) TURN ON THE TRANSMITTER
Turn on the transmitter; your vehicle is paired with your transmitter automatically.
Red/Green
indicator
ON/OFF Switch
NOTE:
1. RC car head lights keep flashing and the LED indicator on the transmitter lights green
when the RC and car is not paired.
2. When the transmitter has been successfully paired with the car, head lights on the
car become solid, and the LED indicator turns red. (It turns green once you move the
steering wheel or throttle trigger.)
3. The head lights on the car start flashing when power is low.
4. The head lights start quick flashing when the car is broken.
5. The transmitter LED indicator turns red and starts flashing slowly when power is low.
(3) CHECK THE STEERING -
Check the steering is working correctly.
STRAIGHT
1) To keep the vehicle run straight in
line, do not move the steering wheel.
(Keep it centred.)
TURN LEFT
2) Turn it left in order to make your
vehicle turn left.
TURN RIGHT
3) Turn it right in order to make your
vehicle turn right.
(4) CHECK THE THROTTLE TRIGGER RESPONSE
A. Pull the trigger back to accelerate, the vehicle will go forward; release it to decelerate
and push it to brake.
B. To stop running your vehicle, release the trigger to Neutral.
C. Push the trigger again once it stops; your vehicle will go backward.
Brake
Reverse
Forward
Neutral
(5) STEERING TRIM
Tune the steering trim to make the vehicle go straight without any steering wheel input.
• When the truck is turning left, turn the ST.TRIM clockwise.
• When the truck is turning right, turn the ST.TRIM counter clockwise.
