Instructions for use DIAGNOcam Vision Full HD
6 Operation | 6.5 Switching the camera off
36 / 52
6.4.5 Combined mode Int Fluore
Transillumination
CAUTION
Possibly hazardous optical radiation emitted by product.
Risk of injury.
Do not look into the active light source.
▶
Connect the camera to the computer.
▶
Start up the imaging software.
▶
Remove the camera from the camera holder.
The recording window of the imaging software shows a live image.
▶
Select combined Int Fluore Transillumination mode (still
image) in the imaging software or with the menu button. The live image
shows the Intraoral mode exclusively.
▶
Select an image detail.
▶
The camera automatically focuses the selected image detail (permanent
autofocus).
▶
Press one of the two trigger buttons.
▶
The camera switches to Freeze mode and/or starts the video recording. The
still image (fluore int transillumination) is transferred to
the imaging software.
▶
To return to Live mode, press the trigger button again.
▶
Process and save the image in the imaging software.
6.5 Switching the camera off
The camera can be switched off by the following means:
▶
Placing the camera in the table holder or wall mount
▶
Extended period of inactivity
Summary of Contents for DIAGNOcam Vision Full HD
Page 1: ...Instructions for use DIAGNOcam Vision Full HD...
Page 50: ......
Page 51: ......
Page 52: ...1 013 5824 bd 20220323 07 en...