Instructions for use ELECTROmatic M/C and PM/PC
6 Operation | 6.6 Protection function SAFEdrive (PM/PC only)
60 / 80
▶
Use the Plus and Minus keys to select the desired SAFEdrive combination
for the speed memory.
ð
The settings are always saved instantaneously.
ð
The activated speed memories are shown in blue.
ð
All combinations for SAFEdrive are possible:
.......
▶
Press both the plus key and the minus key for 2 seconds to exit from the
"Settings" menu.
6.6.2 Use with the SAFEdrive function
With regard to handpieces from third-party manufacturers, KaVo recommends
disabling the SAFEdrive function as the SAFEdrive protection function is effec-
tive only with high-speed handpieces from KaVo.
See also:
2
6.6.1 Turning SAFEdrive on / off, Page 59
If SAFEdrive is activated and the handpiece is overloaded, the first stage,
"SAFEdrive alert", is activated:
▪ The motor power is reduced (can lead to a drop in motor speed).
▪ The LUX light starts to pulse.
▪ The SAFEdrive icon is yellow and flashes.
Requirement
The handpiece is not defective
▶
If you use a handpiece from a third-party manufacturer, deactivate
SAFEdrive or use a high-speed handpiece from KaVo.
