Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.12 Using the foot control
102 / 178
Reassign "SP" or "LP" foot buttons
▶
Hold down the foot control and foot-operated button "SP", and simultan-
eously press any button for an automatic position (SP, LP, AP 0 to AP 3 or
collapsed position) on the dentist or assistant element until you hear a tone.
ð
The automatic position is saved to the foot-operated button.
or
▶
Hold down the foot control and foot-operated button "LP", and simultan-
eously press any button for an automatic position (SP, LP, AP 0 to AP 3 or
collapsed position) on the dentist or assistant element until you hear a tone.
ð
The automatic position is saved to the foot-operated button.
Manually position the patient chair with the foot control
The 4-way switch of the foot control assumes the function of the button wheel
(function level 1) on the dentist element during manually positioning of the pa-
tient chair.
See also:
2
4.5.4 Positioning the dental chair manually, Page 53
Requirement
All instruments are in their holder.
▶
Chair up: Move the cross switch on the foot control in direction
①
.
▶
Chair down : Move the cross switch on the foot control in direction
③
.
▶
Backrest up: Move the cross switch on the foot control in direction
②
.
▶
Backrest down: Move the cross switch on the foot control in direction
④
.
4.12.5 Pre-selecting the type of treatment
Requirement
"Next treatment mode" is activated in Advanced settings / Foot control.
▶
With the handpieces stored, press the foot pedal.
ð
The type of treatment advances upon each actuation of the foot pedal.
Summary of Contents for ESTETICA E70 Vision
Page 1: ...Instructions for use ESTETICA E70 Vision E80 Vision...
Page 177: ......
Page 178: ...1 012 5446 Fk 20191030 9 en...
