Instructions for use ESTETICA E70 Vision / E80 Vision
2 Safety | 2.2 Intended use
14 / 178
In Germany, operators, equipment managers and users are obliged to operate
their equipment in accordance with the MPG regulations.
The services encompass all the test tasks required in accordance with § 6 of the
medical devices operator ordinance (Medizinprodukte-Betreiberverordnung, MP-
BetreibV).
Note
The product must be cleaned and serviced according to instructions if it is not
to be used for an extended period of time.
Note
The MULTIflex couplings, the current K/KL motors, and the ultrasonic scaler
hoses of KaVo are equipped as standard with a protective device to prevent
treatment water from being drawn back into the treatment centre via the
handpieces. If products from other manufacturers are used at the standard-
ised interfaces, it must be ensured that they are equipped with an appropri-
ate protective device! If this is not the case, they may not be used!
The product includes open source licences to a certain extent. The exact licens-
ing conditions, liability disclaimers, concessions and instructions will be provided
to you in the device software. KaVo offers to provide the source code on a CD
ROM; efforts and costs incurred (e. g. costs for auxiliaries, transport and pro-
cessing) will be invoiced in terms of an expense allowance. You can address a
corresponding inquiry to KaVo Dental GmbH in written form.
Information about electromagnetic compatibility
Note
Based on IEC 60601-1-2 (DIN EN 60601-1-2) concerning the electromag-
netic compatibility of electrical medical devices, we must draw your attention
to the following points:
• Medical electrical devices are subject to special precautions concerning the
electromagnetic compatibility and must be installed and operated in accord-
ance with the KaVo assembly instructions.
• High-frequency communications devices may interfere with electrical med-
ical devices.
Note
KaVo cannot guarantee the compliance of accessories, cables, and other
components not supplied by KaVo with the EMC requirements of IEC
60601-1-2 (DIN EN 60601-1-2).
Disposal
Note
Any waste which is generated must be recycled or disposed of in strict com-
pliance with all applicable national regulations in a manner which is safe both
for people and the environment.
If you have any questions regarding proper disposal of the KaVo product,
please contact the KaVo branch.
Summary of Contents for ESTETICA E70 Vision
Page 1: ...Instructions for use ESTETICA E70 Vision E80 Vision...
Page 177: ......
Page 178: ...1 012 5446 Fk 20191030 9 en...
