A 9 Maintenance
Repairs and servicing work on the
electrical part of this equipment must
only be undertaken by experts or by
persons trained in our factory who are
aware of the safety regulations. Disconnect
the mains plug from the power supply or
switch off the disconnecting switch before
opening any part of the equipment.
9.1 Maintenance – monthly.
Check the reel-in track and steel rope
4
for anchorage.-examine electricity supply
cables for wear and damage.
If there are any breaks in the strands
of the steel rope
4
, then the rope
must be changed for safety reasons!
9.2 Maintenance – annually.
Check the anchorage of the guide rail 1 on
the wall.
9.3 Annual function checks:
• Downwards switch-off
Press button
2
“AB“ – switch-off must
follow when the load hook
3
is
4 - 6 cm above the floor.
• Upwards switch-off
Press button
1
“AUF“, - check if the
upwards switch-off functions.
• Move the Silolift up and down under load
no unusual sounds, such as screeching or
similar, should be audible.
Points 9.1 - 9.3 must be documen-
ted, and kept with a “Maintenance
and Function Checks Record“ for the
Silolift.
Cleaning
Wipe away any dirt on the outside with a
damp cloth.
When cleaning , prevent any ingress
of water into the unit.
13
Electric Dispenser Hoist EWL 2, 3, 4
1
4
3
2
