Instructions for use EXTRAmatic 9040
8 Troubleshooting | 6.2 Maintenance
Malfunction
Cause
Remedy
Warning 30 (1201) - Filter
cleaning
Indication that filter is due
for a clean
Filter is severely soiled.
▶ Filter will be cleaned au‐
tomatically the next time
work is interrupted.
Warning 31 (1201) - Con‐
tainer level
Falling flap indicates that
dust container is full
Dust container is full.
▶ Empty the dust container
immediately.
Warning 32 (1201) - Active
carbon filter service life
Reminder to check or re‐
place the active carbon fil‐
ter
The active carbon filter
monitoring time has ex‐
pired.
▶ If message reads "Filter
OK", extend the monitor‐
ing time; if message
reads "Filter worn out",
replace the active carbon
filter.
Extraction only occurs at
one or two extraction
points rather than three.
Extraction line(s) blocked
(due to intake of larger par‐
ticles of debris for in‐
stance).
▶ Check extraction line for
blockage.
Remove debris.
Clean extraction line.
Dirt guard, gold micro filter
blocked
▶ Clean dirt guard and re‐
place gold micro filter if
necessary.
Extraction occurring at all
three extraction points al‐
though only one extraction
channel required.
No supply of compressed
air.
▶ Provide a compressed
air supply and check air
pressure; reset if neces‐
sary.
Extraction not powerful
enough.
Extraction line(s) blocked.
▶ Check extraction lines
for blockage and clean.
Dirt guard, gold micro filter
blocked.
▶ Clean dirt guard
Empty and clean gold
micro filter; replace if
necessary.
The preset extraction level
is too low.
▶ Using the button, select
the next extraction level
up.
51 / 56
Summary of Contents for EXTRAmatic 9040
Page 1: ...Instructions for use EXTRAmatic 9040 Always be on the safe side...
Page 55: ......
Page 56: ...1 003 7096 Fk 20140715 3 en...
