KaVo INTRAcompact contra-angle 0768 LHC, Instructions For Use Manual

77.2   C

Cleaning

CAUTION

Malfunctions from cleaning in an ultrasonic unit.

Defects in the product.

▶ Only clean manually or in a thermodisinfector.

7.2.1   C

Cleaning: Manual cleaning - external

Accessories required:

▪ Tap water 30 °C ± 5 °C (86 °F ± 10 °F)

▪ Brush, e.g. medium-hard toothbrush

Setup methods according to DIN EN ISO 17664

39

▶

Brush off under flowing tap water.

7.2.2   C

Cleaning: Automated external cleaning

KaVo recommends thermodisinfectors in accordance with EN ISO 15883

that are operated with alkaline cleaning agents at a pH of max. 10 (e.g.

Miele G 7781 / G 7881 – validation was performed with the ""VARIO-TD"

programme, "neodisher

®

 mediclean" cleaning agent, "neodisher

®

 Z" neu‐

tralisation agent, and "neodisher

®

 mielclear" rinsing agent and extends only

to the compatibility of materials with respect to KaVo products).

Setup methods according to DIN EN ISO 17664

40

▶

For program settings as well as cleansers and disinfectants to be used,

please refer to the Instructions for Use of the thermodisinfector (com‐

plying with max. pH value of 10).

▶

In order to prevent negative effects on the medical device, make sure

that the interior and the exterior of the medical device are dry, and then

lubricate immediately with care agents from the KaVo care system.

77.2.3   C

Cleaning: Manual cleaning - internal

Can only be done with KaVo CLEANspray or KaVo DRYspray.

▶

Cover the medical device with the KaVo CLEANpac bag, and place it

on the corresponding care adapter. Press the spray button three times

for 2 seconds each time. Remove the medical device from the spray

attachment and let the cleaner work for one minute.

Setup methods according to DIN EN ISO 17664

41

▶

Afterwards, rinse for 3-5 seconds with KaVo DRYspray.

S

See also: KaVo CLEANspray / KaVo DRYspray Instructions for Use

Note
KaVo CLEANspray and KaVo DRYspray for manual interior cleaning are

only available in the following countries:

Germany, Austria, Switzerland, Italy, Spain, Portugal, France, Luxem‐

bourg, Belgium, Netherlands, United Kingdom, Denmark, Sweden, Fin‐

land and Norway.

In other countries, only automated interior cleaning with thermodisinfec‐

tors in accordance with ISO 15883-1.

Setup methods according to DIN EN ISO 17664

42