background image

CAUTION

Damage from soiled and moist cooling air.

Contaminated and moist cooling air can cause malfunctions and lead to

premature bearing wear.

▶ Make sure that the supply of cooling air is dry, clean and unconta‐

minated according to ISO 7494-2.

First use

23

44.1   C

Check the amount of water

CAUTION

Overheating of the tooth due to lack of cooling water.

Thermal damage to the dental pulp.

▶ Adjust the water amount for the spray cooling to a minimum of 50

cm

3

/min

 

First use

24

55   O

Operation

5.1   A

Attaching the medical device

WARNING

Release of the medical device during treatment.

A medical device that is not properly locked in place can release from the

motor coupling and fall off.

▶ Carefully pull on it before each treatment to ensure that the medical

device is securely locked on the motor coupling.

 

 

Operation

25

CAUTION

Damage

If the footswitch is pressed while you are connecting and removing the

medical device, you can damage the medical device and motor coupling.

▶ Do not connect or remove the medical device while pressing the

footswitch.

Operation

26

Summary of Contents for INTRAcompact contra-angle 0768 LHC


















Reviews: