47
Set
tings
Basic Settings
The Basic settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument.
This menu also allows favourite panel settings to be stored, or reset back to the original factory configuration.
Basic Settings
Page no.
Setting name
Explanation
Default setting
1
Key Transpose
Raise or lower the pitch of the keyboard in semi-tone steps.
0 C
2
Song Transpose
Raise or lower the pitch of SMF songs in semi-tone steps.
0
3
Tone Control
Change the EQ settings of the instrument’s sound.
off
4
Speaker Volume
Change the maximum volume level of the speaker output.
High
5
Phones Volume
Change the maximum volume level of the headphones output.
Low
6
Tuning
Increase or decrease the pitch of the instrument in 0.5 Hz steps.
440.0
7
Damper Hold
Change the effect of the sustain pedal on organ, string, etc. sounds.
off
8
Four Hands
Enable the ‘Four Hands Mode’ function.
off
9
User Memory
Store current panel settings as the default (power on) configuration.
-
10
Factory Reset
Reset panel settings back to the original factory configuration.
-
* Default settings will be shown in the first LCD display illustration (i.e. Step 1) for each setting explanation below.
Entering the Basic Settings menu
Press the FUNCTION button to enter the Functions menu.
The Basic Settings menu will be selected automatically.
Functions
1.Basic Settings
Press the FUNCTION button again to enter the menu.
Selecting the desired setting
After entering the Basic Settings menu:
Press the
e
or
f
buttons to cycle through the different
settings pages.
1-1 KeyTranspose
=
0 C
Settings page number
Enter and exit the selected Functions menu
Enter and exit the selected Functions menu
Cycle through the different settings pages
Cycle through the different settings pages