Page
66
7
APPENDICES
ABOUT A USB DRIVER
For data exchange between a computer and digital piano via USB connection, software (USB-MIDI driver) must be
installed on the computer for proper digital piano operations.
Please read the following instructions carefully as a different USB-MIDI driver may be necessary depending on the
computer OS.
Windows XP / Me users:
The standard USB-MIDI driver installed on Windows will be used. This USB-MIDI driver will be automatically
installed when the unit is connected to the computer.
To establish MIDI communications with the unit by using an application, select “USB audio device” to defi ne the
unit as a MIDI device.
Windows Vista / 2000 / 98SE users:
You need to install the specifi ed, special USB-MIDI driver. Download the special USB driver from the KAWAI site
as shown below, and install it on the computer.
http://www.kawaius.com/archive/download_archive_2.html
Read the instruction manual thoroughly before connecting the unit to the computer, and make sure to install the
driver.
If you connect the unit to the computer without installing the driver, the USB-MIDI driver may not operate properly.
If this occurs, use the driver update function of the OS to install the appropriate USB-MIDI driver, or delete the
driver by using the driver delete function and then install the driver again.
To establish MIDI communications with the unit by using an application, select “KAWAI USB MIDI IN” and “KAWAI
USB MIDI OUT” to defi ne the unit as a MIDI device.
Macintosh OS X users:
When the unit is used with Macintosh OS X, the unit will be recognized as a MIDI device automatically; therefore,
no special driver is needed.
To establish MIDI communications with the unit by using an application, select “USB-MIDI” to defi ne the unit as
a MIDI device.
Users of Macintosh OS9 or earlier:
The unit does not support Macintosh OS9 or earlier. Please establish a MIDI connection by using a commercially
available MIDI interface.
NOTES ON USB
x
When MIDI and USB are connected simultaneously, USB will be prioritized.
x
When connecting a digital piano to a computer by using a USB cable, fi rst connect the cable and then turn on the
power of the digital piano.
x
When a digital piano is connected to a computer by using a USB cable, it may take some time before communications
start.
x
When a digital piano and a computer are connected via a hub, and the operation is not stable, connect the digital
piano directly to the USB port of the computer.
x
Operations of a computer or a digital piano may become unstable if the power of the piano is turned on or off, or if
the USB cable is pulled out or inserted during:
* Driver installation
* Computer power-up
* MIDI application operations
* Communication with the computer
* Standby in power-saving mode
Ä
USB may not operate properly depending on the settings of your computer. Read the computer instruction manual
thoroughly before use and ensure that appropriate settings are made.
Ä
“MIDI” is a registered trademark of the Association of Manufacturers of Electronic Instruments (AMEI).
Ä
Windows is a registered trademark of Microsoft Corporation.
Ä
Macintosh is a registered trademark of Apple Computer. Inc.
Ä
Other company names and product names mentioned referenced herein may be registered trademarks or trademarks
of respective owners.
CN42̲EN.indd 66
2008/12/11 13:29:01
