83
Settings
Virtual Technician Settings
1. Selecting the Touch Curve setting
After entering the Virtual Technician menu (page 80):
Press the
or
buttons to select the Touch Curve setting.
2. Changing the Touch Curve type
Press the
or
buttons to cycle through the different Touch
Curve types.
* To reset the Touch Curve setting to the default type, press the
and
buttons simultaneously.
* Any changes made to the Touch Curve type or User Touch setting will
remain until the power is turned off.
* Preferred Touch Curve settings can be stored to the sound’s memory,
or a Registration memory for convenient recall. Please refer to pages
81 and 33 for more information.
3. Exiting the Touch Curve setting
Press the FUNCTION button (BACK) to exit the Touch Curve
setting and return to the Function Menus screen.
User Touch Curve
Creating a User Touch Curve
After selecting the Touch Curve setting:
Press the
or
buttons to select the User touch curve, then
press the REC button.
* User touch curves are created and stored independently for each
sound variation.
A message will be shown, prompting for the keyboard to be
played.
Play the piano dynamically from very soft to very loud, allowing
the instrument to examine the personal playing technique.
* More than one attempt may be required in order to create an accurate
User Touch Curve.
* Reducing the master volume fader to the lowest position before
creating the User Touch Curve may help to reduce user distractions,
thus improving accuracy.
Press the PLAY/STOP button.
The new User Touch Curve will be stored to the User touch type,
and selected automatically.
* If desired, press the FUNCTION button (STORE) to ensure the User
touch type is retained after the instrument’s power is turned off.
