86
Settings
Virtual Technician Settings
3
Damper Resonance
Pressing the damper pedal of an acoustic piano raises all dampers, allowing the strings to vibrate freely. When a
note or chord is played on the piano with the sustain pedal pressed, not only will the strings of the notes played
vibrate, but also the strings of other notes, vibrating in sympathetic resonance.
The CA58 digital piano recreates this phenomenon, with the Damper Resonance setting allowing the volume of this
resonance sound to be adjusted.
* This Virtual Technician setting will affect acoustic piano sounds only.
1. Selecting the Damper Resonance setting
After entering the Virtual Technician menu (page 80):
Press the
or
buttons to select the Damper Resonance
setting.
2. Adjusting the Damper Resonance volume
Press the
or
buttons to increase or decrease the volume of
the Damper Resonance setting.
* The Damper Resonance volume can be adjusted within the range
of Off, 1~10, with higher values resulting in a more pronounced
resonance.
* To reset the Damper Resonance setting to the default value, press the
and
buttons simultaneously.
* Any changes made to the Damper Resonance setting will remain until
the power is turned off.
* Preferred Damper Resonance settings can be stored to the sound’s
memory, or a Registration memory for convenient recall. Please refer
to pages 81 and 33 for more information.
3. Exiting the Damper Resonance setting
Press the FUNCTION button (BACK) to exit the Damper
Resonance setting and return to the Function Menus screen.
