14
In
tr
oduc
tion
Setting Up the Piano
1. Connecting the power cable to the instrument
Connect the included power cable to the ‘AC IN’ inlet located on
the right hand side, towards the back of the instrument.
2. Connecting the power cable to an outlet
Connect the instrument’s power cable to an AC outlet.
3. Turning on the power
Press the POWER switch located on the right hand side of the
front panel.
The instrument will turn on, and the words ‘SK ConcertGrand’ will
be shown in the LCD display, indicating that the SK Concert Grand
sound is selected, and the instrument is ready to be played.
To turn off the instrument, please the POWER switch again.
* The CA58 digital piano features a power saving mode that can turn off the
instrument automatically after a specified period of inactivity. For more
information, please refer to the ‘Auto Power Off’ setting on page 79.
Adjusting the pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed. Turn the bolt anti-
clockwise until it makes contact with the floor and supports the
pedals firmly.