41
Music M
enu
4
Repeating sections of a lesson song
The ‘A-B Loop’ feature of the Lesson Function allows sections of the selected lesson song to be ‘looped’ between two
points in order to practise difficult passages continuously.
1. Playing the lesson song
After selecting a lesson book and song:
Press the PLAY/STOP button.
The LED indicator for the PLAY/STOP button will turn on, and a
one bar count-in will be heard before the song starts to play.
2. Specifying the start point (A) of the loop
Press the FUNCTION button (A-B) to specify the start point of
the loop.
The LED indicator for the FUNCTION button will start to flash,
indicating that the start point (A) of the loop has been set.
Point ‘A’ set
3. Specifying the end point (B) of the loop
Press the FUNCTION button (A-B) again to specify the end
point of the loop.
The LED indicator for the FUNCTION button will turn on,
indicating that the end point of the (B) of the loop has been set.
Point ‘B’ set:
loop active
The defined ‘A-B’ section of the lesson song will repeat (loop),
allowing the passage to be practiced continuously.
4. Cancelling the ‘A-B’ loop
Press the FUNCTION button (A-B) once again to cancel the
loop.
The LED indicator for the FUNCTION button will turn off, and
the lesson song will resume normal playback.
* The Balance and Tempo lesson function settings can continue to be
adjusted while the A-B loop is in operation.
Lesson Function
