50
Rec
or
der
2
Playing a song
This function is used to playback recorder songs stored in internal memory. To playback a song/part immediately
after recording, start this process from step 2.
1. Entering song play mode
Press the PLAY/STOP button.
The LED indicator for the PLAY/STOP button will turn on, and the
Internal Recorder play screen will be shown in the LCD display.
Stopped
Part
Recorded
2. Selecting the song/part(s) to be played back
Press the
or
buttons to move the selection cursor over the
song memory or part.
Press the
or
buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be played back.
If a part has already been recorded, a
*
symbol will be shown.
Part has been recorded
3. Starting/stopping song playback
Press the PLAY/STOP button.
The LED indicator for the PLAY/STOP buttons will turn on, and
the selected song/parts will start to play.
* The selected part can be changed during song playback.
* To adjust the playback tempo of the recorded song, press and hold the
METRONOME button, then press the
or
buttons.
Press the PLAY/STOP button again.
The LED indicator for the PLAY/STOP button will turn off and the
song will stop playing.
5. Exiting song play mode
Press the FUNCTION button (EXIT), to exit the Internal
Recorder and return to normal operation.
Song Recorder
(Internal Memory)
* If a USB memory device is connected, press the FUNCTION button
(INT) to select the internal song recorder.
buttons:
Move selection cursor.
buttons:
Select song memory/part.
