52
Rec
or
der
Song Recorder
(Internal Memory)
4
Erasing a part/song
This function is used to erase recorder parts that may have been recorded incorrectly or songs that are no longer
listened to. Once a part/song has been erased from memory it cannot be recovered.
1. Selecting the Erase function
After entering the Internal Recorder edit menu (see page 51):
Press the
or
buttons to move the selection cursor over the
Erase function.
Press the FUNCTION button (ENTER) to select the Erase
function.
2. Selecting the song/part to be erased
Press the
or
buttons to move the selection cursor over the
song memory or part.
Press the
or
buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be erased.
If a part has already been recorded, a
*
symbol will be shown.
3. Erasing the selected song/part
Press the FUNCTION button (OK) to Erase the selected song
and part.
A confirmation message will be shown in the LCD display,
prompting to confirm or cancel the erase operation.
Press the FUNCTION button (YES) to confirm the erase
operation, or the FUNCTION button (NO) to cancel.
Erasing all recorder songs from memory
Press and hold the PLAY/STOP and REC buttons, then turn the
instrument’s power off/on.
All recorder songs stored in memory will be erased.
buttons:
Move selection cursor.
buttons:
Move selection cursor.
buttons:
Select song memory/part.
hold
hold
YES:
Erase
NO:
Cancel
