53
Rec
or
der
5
Converting a song to an audio file
This function allows recorder songs stored in internal memory to be played back and saved (converted) as an audio
file to a USB device in either MP3 or WAV format.
1. Selecting the Convert to Audio function
After entering the Internal Recorder edit menu (see page 51):
Press the
or
buttons to move the selection cursor over the
Convert to Audio function.
Press the FUNCTION button (ENTER) to select the Convert to
Audio function.
2. Selecting the song/part to be converted
Press the
or
buttons to move the selection cursor over the
song memory or part.
Press the
or
buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be converted.
If a part has already been recorded, a
*
symbol will be shown.
Press the FUNCTION button (OK) to continue.
3. Selecting the audio file format
Press the
or
buttons to select the desired file format for the
converted song.
It is also possible to adjust the recording gain at this stage.
* For more information about the instrument’s audio recorder gain
setting, please refer to page 54.
4. Starting the conversion
Press the PLAY/STOP button, or a key on the keyboard.
The LED indicator for the PLAY/STOP and REC buttons will turn
on, the selected song will play, and the convert to audio process
will start.
* Notes played on the keyboard will also be recorded to the audio file.
Naming and saving the converted audio file
Please follow the ‘Recording a MP3/WAV audio file’ instructions on page 55 from step 4.
buttons:
Move selection cursor.
buttons:
Move selection cursor.
buttons:
Select song memory/part.
buttons:
Select audio recorder format.
Song Recorder
(Internal Memory)
