57
Rec
or
der
2. Selecting an audio file
Press the
or
buttons to move the selection cursor, then
press the FUNCTION button (SELECT) to select the audio file.
The USB Recorder play screen will be shown in the LCD display.
3. Playing the selected audio file
Press the PLAY/STOP button.
The selected audio file will start to play, and information about
the file will be shown in the LCD display.
Audio file,
artist/song
Playback
volume
Playing
position
Controlling audio file playback
While the audio file is playing:
Press the PLAY/STOP button to pause and resume playback.
Press the
or
buttons to rewind or advance the playing
position of the audio file.
Press the
or
buttons to adjust the playback volume of the
audio file.
* The playback volume can be adjusted within the range of 1~100.
Press the FUNCTION button (A-B) twice to set the start and
end points of the A-B loop.
* Pressing the A-B button for a third time will turn off the loop.
USB Recorder Edit menu
The USB Recorder Edit menu allows the playback mode (Single, 1-Repeat, All-Repeat, Random) to be changed, and the pitch of the keyboard
to be transposed in semi-tone steps. Please refer to page 60 for more information.
Overdub function
The Overdub function allows the sound of the CA58 to be recorded (overdubbed) to an existing MP3 or WAV audio file.
Please refer to page 62 for more information.
4. Exiting USB playback mode
Press the FUNCTION button (BACK) to exit USB playback mode
and return to normal operation.
* If the selected audio file contains embedded metadata (e.g. ID3 tags)
such as artist name and song title, this information will be also be
shown beside the filename.
buttons:
Adjust playback volume.
buttons:
Rewind/advance playing position.
* There may be a noticeable difference in volume between audio file
playback and the CA58 keyboard sound. When playing back audio
data, please adjust the volume of the audio file as desired.
Audio Record/Playback
(USB Memory)
