64
Settings
Basic Settings
The Basic Settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument.
This menu also allows favourite panel settings to be stored, or reset back to the original factory configuration.
Basic Settings
No. Setting
Description
Default setting
1
Key Transpose
Raise or lower the pitch of the keyboard in semi-tone steps.
0 (C)
2
Song Transpose
Raise or lower the pitch of the recorder/MIDI song in semi-tone steps.
0
3
Tone Control
Change the EQ settings of the instrument’s sound.
Off
4
Speaker Volume
Change the maximum volume level of the speaker output.
Normal
5
Line In Level
Adjust the input volume of the Line In connectors.
0 dB.
6
Tuning
Raise or lower the pitch of the instrument in 0.5 Hz steps.
440.0 Hz
7
Damper Hold
Change the effect of pressing the sustain pedal on organ, string, etc. sounds.
Off
8
Split
Enable the ‘Split Mode’ function.
Off
9
Four Hands
Enable the ‘Four Hands Mode’ function.
Off
10
Bluetooth MIDI
Enable/disable the instrument’s Bluetooth MIDI function.
On
11
LCD Contrast
Adjust the contrast of the instrument’s LCD display.
5
12
Startup Setting
Store current panel settings as the default (power-on) configuration.
-
13
Factory Reset
Restore all panel settings to the original factory configuration.
-
14
Auto Power Off
Enable/disable the instrument’s Auto Power Off energy saving function.
-
* Default settings will be shown in the first LCD display illustration (i.e. Step 1) for each setting explanation below.
Entering the Basic Settings menu
While the normal playing mode screen is shown in the LCD display:
Press the FUNCTION button (ENTER).
The Function menus will be shown in the LCD display.
Press the FUNCTION button (ENTER) again to enter the Basic
Settings menu.
Selecting and adjusting the desired setting
After entering the Basic Settings menu:
Press the
or
buttons to move the selection cursor over the
desired setting.
Press the
or
buttons to adjust the selected setting.
* To reset the current setting to the default value, press the
and
buttons simultaneously.
buttons:
Move selection cursor.
buttons:
Adjust selected setting.
