68
Settings
User Tone Control
The User Tone Control option allows finer control over the instrument’s sound character, allowing the volume of four
frequency bands to be adjusted individually. It is also possible to adjust the frequency range of the mid-low and
mid-high frequency bands.
User Tone Control setting
No. User Tone Control
Description
1
Low
Adjusts the volume of the low range frequency band (20~100 Hz).
2
Mid-low Frequency
Adjusts the frequency of the mid-low band (250~4000 Hz).
Mid-low dB
Adjusts the volume of the mid-low range frequency band.
3
Mid-high Frequency
Adjusts the frequency of the mid-high band (250~4000 Hz).
Mid-high db
Adjusts the volume of the mid-high range frequency band.
4
High
Adjusts the volume of the high range frequency band (5000~20000 Hz).
1. Selecting the User Tone Control setting
After selecting the Tone Control setting (page 67):
Press the
or
buttons to select the User Tone Control type,
then press the FUNCTION button (EDIT).
The User Tone Control screen will be shown in the LCD display.
2. Selecting and adjusting the User Tone Control settings
Press the
or
buttons to select the User Tone Control setting.
Press the
or
buttons to increase or decrease the value of the
selected User Tone Control setting.
* Each User Tone Control band can be adjusted within the range of
–6 dB~+6 dB.
* To reset the User Tone Control setting to the default type, press the
and
buttons simultaneously.
* Any changes made to the User Tone Control setting will remain until
the power is turned off.
* Preferred User Tone Control settings can be stored to the Startup
Setting memory for convenient recall. Please refer to page 77 for
more information.
3. Exiting the User Tone Control setting
Press the FUNCTION button (BACK) to exit the User Tone
Control setting and return to the Tone Control setting.
Basic Settings
