Kawai Concert Performer CP139 Quick Start Manual Download | Manualshive

Page: 107 / 220

background image

Page

67

5

Using a Style

Step 4

If you wish to play the selected Style, press either the START/STOP button to start the Style playing
immediately, or the INTRO/ENDING button to start the Style with an Intro pattern.
You can also press the SYNC/FADE OUT button before starting a Style or pressing the INTRO/END
buttons.

When the SYNC/FADE OUT button is pressed, the Style will not start until you play a note or chord on the

keyboard.

Step 5

To adjust the tempo of the Style, use the Dial to change the Tempo.

The tempo will be displayed in the top left corner of the LCD screen.

You can also use the TAP TEMPO button. Tap the button three or more times at the desired tempo, and the
CP will automatically translate your taps into an on-screen Tempo value.

Step 6

To stop the Style, press either the START/STOP button to stop the Style immediately, or the INTRO/ENDING
button to stop with an ending pattern,

You can also press the SYNC/FADE OUT button and have the Style fade out gradually.

You can also select a Style when you are in the main play screen, simply by using the Dial. Touch the name of the style

and it will become highlighted, then use the Dial to select another Style.

The CP remembers the last Style selection that you made within each category while the power is on. When you press

a STYLE button, the CP will automatically select the Style previously chosen in the same category.

When you switch from one Style to another while it is running, the new Style will wait until the beginning of the next

measure before it begins to play.

Intro/Ending

When one of the Intro/Ending buttons is pressed to start a Style the selected Intro pattern will be played before the

selected Variation pattern plays. There are both major and minor versions for each Intro . The Auto-accompaniment

System will decide which Intro to use based upon the ﬁrst Chord you play (major or minor). The LCD screen will

display a countdown in bars to show how many bars you have until the variation begins playing. When one of these

buttons is pressed while the Style is running the selected Ending pattern will be played before the Style stops.

There are major and minor versions for each Ending.

Each Style two different Intros and Endings.

Intro/Ending 1 is the main Intro/Ending for the style.

Intro/Ending 2 is a shorter Intro/Ending.

When this button is pressed before starting a Style or before pressing the INTRO/ENDING
button, the Style will not start until you play a note or chord on the keyboard. When this
button is pressed while the Style is running the Style will gradually fade out. When this
button is pressed during a fade out the Style will gradually fade back in and you may resume
playing the Style. You can press the SYNC/FADE OUT button at any time while any of the
patterns (Intro, Variation, Ending) in the Style are running to fade in or out of the Style.

Starts or stops the Style immediately.

«
...
105
106
107
108
109
...
»

Summary of Contents for Concert Performer CP139





























































































































































































































Reviews:

No comments

Related manuals for Concert Performer CP139

Brand: Roland Pages: 15

Brand: OHAUS Pages: 52

Brand: IFM Pages: 2

Brand: Oceanic Pages: 68

Brand: Oceanic Pages: 24

Brand: OHAUS Pages: 2

Brand: QuantAsylum Pages: 70

Brand: Velleman Pages: 96

Clavinova CLP-311

Brand: Yamaha Pages: 29

Brand: Yamaha Pages: 2

Brand: Yamaha Pages: 15

Brand: Yamaha Pages: 3

Alto Horn, Baritone, Euphonium

Brand: Yamaha Pages: 22

Clavinova CLP-320

Brand: Yamaha Pages: 2

Brand: Yamaha Pages: 20

Brand: MULTISPAN Pages: 2

Brand: R&S Pages: 130

Brand: Tektronix Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands