Kawai Concert Performer CP139 Quick Start Manual Download

Page: 112 / 220

Page

Using a Style

4) Registration

A Registration is a setup that remembers the panel settings along with many other performance functions so that

you can recall them at the touch of a button. This lets you begin to play quickly instead of spending a lot of time

programming all the settings and values manually.

Registration Buttons

There are 8 Registration buttons on the panel of the Concert Performer. Each button contains a different registration.

Pressing any of the Registration buttons activates the setup stored there. Pressing another Registration button changes

to the registration stored in that button. Pressing the active Registration button again deactivates the registration and

returns you to the original panel setup.

Registration Groups

There are 20 Registration Groups in the Concert Performer. Each group contains settings for the 8 Registration buttons

on the panel. Each group represents a “family” of settings for the CP. The sound and performance capability of the

Concert Performer is remarkable, and each registration group is designed to take full advantage of certain types of

sounds available in the instrument. Switching from one Registration Group to another instantly changes the Registration

buttons from Pipe Organ settings to Orchestra settings, for example.

The default Registration Group is “American Pop”, a family of registrations designed to play popular music from the

1940’s through today.

With 8 Registration buttons and 20 Registration Groups, you have a total of 160 pre-programmed Registrations

available. Plus, you can overwrite any registration with your own unique setups.

To use a Registration:

Step 1

Press the REGISTRATION GROUPS button.

Ten Registration Groups will be displayed.

Step 2

Touch the PAGE buttons to view the Registration Groups on the other page.

Touch the name to select the Registration Group,
then press one of eight REGISTRATION buttons
to call the desired setup..

PAGE : Lists the Registration Groups on the other pages.
NAME : Takes you to the Registration Group Name screen.
SAVE : Takes you to the Registration Group Save screen.

Step 3

Touch the desired the desired Registration Group name to select it.

Step 4

Press one of the eight REGISTRATION buttons to activate a Registration from your selected Registration
Group.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands