Kawai Concert Performer CP139 Quick Start Manual Download

Page: 127 / 220

Page

Using a Style

Crossover

This determines the point where a Scalic Phrase will be transposed to keep the notes in a musically useful range.

When notes in a Scalic Phrase fall below the Crossover point you select they will be transposed up one octave by the

Accompaniment System. For example if you set the Crossover point to E, the Phrase would begin to be transposed up

one octave whenever you play a chord with an E as the root.

Experiment with the different Chordal and Scalic settings to ﬁnd the one that works best with each Phrase.

Bass Limit

This is an option for the Bass section and sets the limit for the lowest note the Bass will play. If a note in a Bass Phrase

falls below the limit, it will automatically be transposed up an octave.

To adjust the auto-accompaniment system:

Step 1

Touch the buttons on the left side of the screen to select the settings you wish to change.

BACK : Takes you to the previous menu.
PLAY : Plays the style.
PART : Selects the Section.

Step 2

Touch the buttons at the bottom of the screen to select the Section.

Step 3

Use the Dial to select or change a value.

Step 4

When done, touch the BACK button to return to the previous menu, then save the Style if necessary.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands