Kawai Concert Performer CP139 Quick Start Manual Download

Page: 154 / 220

Page

114

System Men

Pure Temperament

This temperament, which eliminates dissonances for thirds and ﬁfths is still popular for choral music because of its perfect

harmony.

You need to be aware what key you are playing in with this temperament. Any key modulation will result in dissonances.

When you play music in a particular key, you need to match the key of the temperament as well.

Pythagorean Temperament

This temperament, which uses mathematical ratios to eliminate dissonance for ﬁfths, is very limited for use with chords,

but it produces very characteristic melodic lines.

Meantone Temperament

This temperament, which uses a mean between a major and minor whole tone to eliminate dissonance for thirds, was

devised to eliminate the lack of consonance’s experienced with certain ﬁfths for the Pure temperament. It produces

chords that are more beautiful than those with the equal temperament.

Werckmeister III, Kirnberger III Temperament

These two temperaments are placed in between Meantone and Pythagorean. For music with few accidentals, this

temperament produces the beautiful chords of the mean tone, but as accidentals increase, the temperament produces

the characteristic melodies of the Pythagorean temperament. It is used primarily for classical music written in the Baroque

era to revive the original characteristics.

Arabic

Some oriental scales, including the Arabic, are characterized for “quarter-tone” which is half of a half-tone (50 cents). This

makes the music sound very different from traditional western music. The CP Piano provides two of the most popular

Arabic scales, although you can create more variations with the User Temperament function. With Arabic 1, the notes B

and E are a quartertone lower than the Occidental Scale, while the notes A and E are lower with Arabic 2.

To create a User Temperament:

Step 1

On the Temperament screen, touch the EDIT button.

The User Temperament screen will be displayed.

Step 2

Touch the screen to select the note to edit.

BACK : Takes you to the Temperament menu.
KEY : Selects the key/note to edit.
TUNE : Adjust the tuning value of the selected key/note.
SAVE : Saves the User Temperament.

Step 3

Use the Dial or touch the - TUNE + buttons to change the value.

The value is represented in cents above or below Equal temperament and ranges from -50 to +50.

Step 4

Touch the SAVE button to save the User Temperament.

The User Temperament alters the tuning for each octave equally. In other words, you cannot alter the tuning of different

sections of the CP’s keyboard range separately.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands