Kawai Concert Performer CP139 Quick Start Manual Download

Page: 186 / 220

Page

146

CD Oper

ations

3) Recording to CD

The CP can record performances directly onto a CD-R or CD-RW disc. These performances can be “live” playing

with or without auto-accompaniment styles, or previously recorded songs played from the Easy or Advanced

Recorder. It is even possible to record vocals or other instrument connected to the Mic input*, or MP3/WAV audio

ﬁles played using the Play Audio function.

Multiple songs (tracks) up to the full time capacity of the disc can be recorded onto CD. Once a song is recorded

to CD-R, the Concert Performer cannot erase it. CD-RW discs, however, can be recorded to and erased multiple

times.

* vocals, and/or any other instrument recorded using the Mic Input, must be played “live” and recorded directly to the CD - it is not possible

to store this audio in internal memory using the Easy/Advanced Recorder function.

Step 1

Insert a blank or ‘open’ CD in the CD drive, then touch the Record option in the CD menu.

The CD Record screen will be displayed in the LCD screen.

Step 2

The Concert Performer will check the CD and automatically set the recording track number.

TRACK NUMBER : Shows the recording CD

track number.

STYLE : The selected Style.

TEMP : The tempo of the selected Style.

LEFT : The sound assigned to the LEFT part.

TIME REMAINING : Shows the remaining time

available for recording to CD.

SOLO : The sound assigned to the SOLO
part.

RIGHT1 : The sound assigned to the RIGHT1
part.

RIGHT2 : The sound assigned to the RIGHT2
part.

SELECTED SOURCE : Displays additional
sources of audio, if selected.

MENU : Return to the main USB menu.
TRANSPORT BUTTONS : Control recording of audio ﬁle.
SOURCE SELECT : Select additional audio sources to add

to the recording.

Step 3

Touch the

button (record).

The CD recorder will enter ‘Ready’ mode.

Step 4

If you start an Accompaniment Style, or start the Song Recorder, CD recording will start automatically.

Step 5

To start the recording manually, touch the

button (play).

Step 6

Play the keyboard.
Touch the

button (stop) to stop recording.

All sounds created by the instrument will be recorded as to CD.

If you wish to record with a Style accompaniment, press the SYNC/FADE OUT button instead of touching the play button

to start the accompaniment and recorder at the same time.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands