Kawai Concert Performer CP139 Quick Start Manual Download

Page: 53 / 220

Page

t Names

& Functions

2) Overview of Controls

This manual provides you with all the information you will need in order to take full advantage of the Concert

Performer’s potential. Before you begin learning how to use the speciﬁc features, it is important to understand

some of the basic ideas behind the instrument’s design.

The Concert Performer has been designed to have an easy and intuitive user interface. However, the instrument

has so many features that it is simply impractical to have a dedicated button for every single one. As a result, many

features and functions are selected by choosing them from lists, or “menus”, that are presented to you on the CP’s

large display screen. Often times selecting an item from a menu may access another “sub-menu” of options speciﬁc

to that item. This system of menus and sub-menus keeps everything logical and straightforward and becoming

familiar with how to make your way through them is very easy.

Panel Buttons

Most of the buttons on the front panel are used to directly select a function on the CP that you would like to work

with. In most cases, the speciﬁc function name is printed on the front panel directly above the button. For example,

there are buttons labeled 1-2 PLAY, FILL-IN, and so on. In this manual, references to these buttons are always

printed in capital letters for clarity. Most of these buttons have an LED Indicator (small light) on them. This Indicator

will be turned ON when a function is in use so that you can quickly see if that function is active.

LCD Touch Screen

The LCD Touch Screen is the window through which the Concert Performer communicates with you. The large

display size allows many items to be clearly displayed at the same time, allowing for not only words but graphics

to be shown as well.

As well as providing information about the current sound and style selections, and other important settings, the

LCD display can also be used to control numerous functions of the CP139. Simply touch the part of the screen

that corresponds to the function you wish to control or adjust. Below is an example of the default MAIN screen that

appears when the instrument is ﬁrst turned on.

Default MAIN screen

SOLO

part: Ballad Flute selected

but currently inactive

RIGHT1

part: Concert Grand

selected and currently active

RIGHT2

part: Beautiful Strings

selected but currently inactive

STYLE

: Piano Pop

TEMPO

: Tempo of selected style

in beats per minute (BPM)

LEFT

part: Pop Ensemble selected,

but currently inactive

MIXER

: Show mixer screen

VOLUME

: Adjust volume of

currently selected part

In some cases when you touch an item displayed on the screen, that item will become highlighted (shown in

reverse color) to indicate you it has been selected. However, in other cases a submenu screen relating to that

item will be displayed, presenting you with further options.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands