Kawai Concert Performer CP139 Quick Start Manual Download

Page: 6 / 220

Page

SOUNDS

2. SOUNDS

There are over 900 different instrument sounds built into the CP139, providing an almost limitless range of possible

musical playing styles. However, with such a large selection of instrument voices available, it is important to understand

the various methods of selecting and adjusting the sounds. After following the steps in this topic, you should become

conﬁdent at navigating around different screen menus, and be able to select multiple sounds within a few seconds.

THE ‘RIGHT 1’ PART

The panel buttons are responsible for controlling the majority of functions on the CP139, with buttons to the left of the

display associated with selecting and adjusting accompaniment styles, and buttons to the right of the display used to

select and adjust instrument sounds.

Step 1

Turn on the instrument.

After a brief wait the MAIN screen will appear, as seen below.

The

RIGHT 1

box is highlighted, with

Concert Grand

written in large letters to indicate that the Concert

Grand sound is selected, and that the part is active.

The LED indicator for the

RIGHT 1

panel button will

also turn on.

Step 2

Play the keyboard.

The sound of a full bodied KAWAI EX Concert Grand will be heard.

Step 3

Adjust the volume level using the

MASTER VOLUME

slider.

Move the slider to the right or left to increase or

decrease the volume of the sound. The middle position

is often a good starting point.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands