Kawai Concert Performer CP139 Quick Start Manual Download

Page: 75 / 220

Page

Pla

ying the Piano

(Basic Controls)

7) Piano Only

The Piano Only button provides a way to quickly set the Concert Performer up to play the Concert Grand piano

sound. Pressing the Piano Only button immediately turns off all Parts except the Right 1 part and sets the Right

1 sound to Concert Grand.

The Piano Only button also turns off all auto-accompaniment functions and stops the Easy/Advanced Recorder.

Additionally, pressing the Piano Only button will cause the CP to exit any function or editing screen (except for

Concert Magic) and immediately return to the Main Screen.

When you are using Concert Magic, pressing the Piano Only button will change the Concert Magic song’s preset

sounds to Concert Grand piano.

Pressing and holding the PIANO ONLY button will revert the panel settings to their original factory settings.

You can also use the Piano Only button as a “panic button” to immediately stop any unintended accompaniment style

or recording, or to quickly exit any confusing situation and return to a familiar piano sound.

To use Piano Only:

Press the PIANO ONLY button.

The Main Screen is displayed and the Concert Grand sound is assigned to RIGHT1.

Summary of Contents for Concert Performer CP139



























































































































































































































Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands

Kawai Concert Performer CP139, Quick Start Manual

Search results

Summary of Contents for Concert Performer CP139

Reviews:

Related manuals for Concert Performer CP139

Brands by name

Popular brands