Page
19
2
PLA
YING THE
PIANO
5) EFFECTS/REVERB
When selecting some preset sounds, the LED indicator for the EFFECTS or REVERB buttons may turn on
automatically. This is because certain preset sounds are prepared with an effect enabled as their default setting.
Adding an effect to the sound enhances tonal quality and improves acoustic realism. This CN41 piano features
two separate groups of effects. The fi rst is reverb and the second contains chorus, fl anger, delay, tremolo and
rotary speaker effects.
ADDING REVERB
REVERB
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall. There are six types of reverb available: Room 1, Room 2, Stage, Hall 1, Hall 2 and Plate.
Step1
Press the REVERB button.
The LED indicator will turn on to indicate that reverb is in use. Press and hold the REVERB button to show the
currently selected reverb type in the display.
Step2
To change the reverb type, use the VALUE buttons while holding down the REVERB button.
To turn off the reverb, press the REVERB button again.
Press the REVERB button once again to turn the reverb back on. The previously selected reverb type will be
used.
Any changes made to the reverb type or on / off status will remain until the power is turned off.
When the power is turned off the reverb settings will return to the default settings.
Hold down the button.
ÇÈ
ÇÈ
ÇÈ
ÇÈ
Reverb
Type
=
Room
1
Reverb
Type
=
Room
2
Reverb
Type
=
Stage
Reverb
Type
=
Hall
1
Reverb
Type
=
Hall
2
ÇÈ
Reverb
Type
=
Plate
