Kawai F-351, Assembly Instructions Manual

1.  Do not use this F-351 for any purpose other than its intended use as a piano pedal unit.

2.  At the final stage of assembly, ensure that all screws are firmly tightened.

3.  Do not drag the product along the floor. Take care not to drop the product.

4.  Do not stand on the pedal unit or apply undue force on it.

5.  If any screws are found to be loose, tighten them immediately.

6. Ensure that the adjuster bolt firmly touches the floor, supporting the pedal unit and preventing instability or 

damage.

7.  When moving the piano, raise the adjuster bolt and readjust after moving.

„

 Included  parts

Before attempting to assemble the digital piano stand, please ensure that all parts below are included. A Phillips-head 
screwdriver (not included) will also be required in order to assemble the stand.

Pedal board

(including adjuster bolt)

a

 Screw (5x25mm) x 4

AA

1. Pull out the pedal cable

Unfasten and extend the pedal connection cable attached 
to the bottom of the pedal board 

A

.

2. Attach the pedal board 

A

 to the stands (HML-2)

Fix the pedal board 

A

 to the stand using four screws 

a

.

*  When it is difficult to engage the pedal board with the 

stand, slightly loosen the screws fixing the back board 

B

of the stand.

*  Remove if any hole patches have been stuck to hide holes 

in the stand.

AA

BB

a

a

F-351 Assembly Instructions

English

2