14
3.1 Stand assembly
• Remove the screw and washer.
• Insert the stand post into the wheel brace
Make sure that the pin
Z
on the botton of the power supply
housing
14
is completely inserted into the receptacle
A
, so that the
locking screw
S
engages in the provided groove
N
.
4. USER’S MANUAL
4.1 Base
• Engage the brake on the lockable castors
• Secure the brakes on the locking castors.
• To move the light, release the brakes on the castors
4.2 Stand post
• Adjust to desired height
4.3 Operating the light
4.3.1 ON/OFF switch
The KaWe examination light is turned OFF and ON by pressing on the
switch
16
on the light body.
4.3.2 Positioning
To adjust the position of the light arm, use the clamping lever
17
on
the transformer houseing.
Adjust the position of the light body using the hand grip
18
. The flexi-
ble joint
G
holds the light body in the desired position.