Laws and building and safety codes governing the design and use of glazed entrance, window
, and curtain wall products vary widely
. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor
.
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
© Kawneer Company
, Inc., 2013
1
kawneer.com
EC 97904-076
2-1/16"
40"
41-9/32"
Kawneer 1786 Rim Exit Device
INSTALLATION INSTRUCTIONS
APRIL, 2018
038311EN
CYLINDER INSTALLATION
Cylinder must be installed before exit device.
Insert cylinder with cylinder ring into the door stile
and secure in place with cylinder mounting screws.
Cylinder
CL
Device
CL
Bottom of door
HOUSING COVER
FILLER PLATE
EXIT DEVICE
DOOR STILE
DOGGING KEY
RIM EXIT DEVICE LOCATION
CYLINDER &
CYLINDER RING
CYLINDER
CYLINDER RING
CYLINDER
MOUNTING
SCREWS
INSTALLING CYLINDERS BY OTHERS
Cut tailpiece to correct length and install.
(Mounting screw heads must be flush with door surface.)
Cylinder mounting screws
must be flush
Note: Any modification of the Exit Device done in the field shall void the warranty of the product. Kawneer
cannot guarantee the proper function of an Exit Device that has gone through any type of modification.
