High Speed Camera User Guide
18
NOTES
:
1.
A fiber cable should match the QSFP+ type. If a single mode QSFP+ is used a single mode
fiber (yellow) should be used with it. If a multi-mode QSFP is used a multi-mode fiber
(orange) should be used.
2.
The Fiber cable is connected between TX output (marked with TX or Arrow outwards the
QSFP+) on JetCam
unit and RX input (marked with RX or Arrow inwards the QSFP+) on
Komodo Fiber frame grabber.
3.
If more than a single cable is used to connect to the same Frame Grabber, the cables must be
of the same type and length.
Komodo Fiber
Frame Grabber
JetCam Camera
Fiber cable
(up to 10 km)
Power
supply
Figure 5 : JetCam Camera connection example
Installation and Configuration
Figure 3 : QSFP+ Module with
fiber cable inserted
Figure 4 : QSFP+ Module’s locking
mechanism
