High Speed Camera User Guide
36
The “Camera” tab is the main interface for all camera settings. JetCam camera adjustments and
configurations can be made from the “Camera” tab, as detailed in this section.
JetCam camera uses an internal XML that contains the following categories.
10.1
Device Control category
1
4
5
2
3
6
Figure 16 : Device Control category
1.
“Device Control” shows camera vendor, JetCam model and manufacturer.
2.
Device Firmware shows the current JetCam firmware.
3.
Device Reset executes reset procedure to the JetCam device.
4.
Device Temperature can be switched between Processor and Sensor. The device temperature
displayed below, in accordance with the chosen device.
5.
Serial Port Selector.
6.
Serial Port Baud Rate.
10
Camera Features
