High Speed Camera User Guide
27
The following table describes the pin out of the Hirose 6 pin female connector:
Table 6 : GPIO connector pin out
(1)
Used for external exposure indication as well as for the serial communication (can't be used for both at the
same time).
(2)
Used for external trigger as well as for the serial communication (can't be used for both at the same time).
An HR 10 A - 7 P - 6 S (Hirose Electric) connector or equivalent should be used on the cable side:
Figure 15 : GPIO connector pin out
Hardware Reference
Pin number
Pin description
1
GND
2
RS232 TX1
(1)
3
RS232 RX1
(2)
4
RS232 TX2
5
RS232 RX2
6
12V (output)
