High Speed Camera User Guide
39
Figure 25 : JetCam description parameters
10.6
Starting and controlling acquisition
After JetCam camera was detected and configured, the stream acquisition can commence.
In order to start the acquisition, press the
button, located in the main toolbar.
To stop the acquisition, press the
button located in the main toolbar or the picture window.
Acquisition can also be controlled from “Device Control” located in window menu and “Acquisition
Control” category, located in the “Camera” tab.
10.7
Buffer Replay Mode
After the stream acquisition commenced, controlling acquisition and replaying frames can be made
using the picture window toolbar. In order to switch between live acquisition and replaying frames,
use the
button.
When Replay Mode is chosen, additional icons will appear in the Picture window toolbar.
10.8
Saving a captured image
In order to save a captured image, open “File” menu and click “Save Picture…” option. This will
open a save dialog, where you should choose the image format, destination folder and file name.
Click “Save” to save the image currently captured in the “Picture Window”.
Using JetCam Camera
