High Speed Camera User Guide
47
1
2
3
4
5
6
Figure 31 : Analog Control category
1.
Selection of digital gain
a.
DigitalAll – add gain to all the colors channels
b.
DigitalRed – add gain only to the red color channel
c.
DigitalGreen – add gain only to the green color channel
d.
DigitalBlue – add gain only to the blue color channel
2.
Digital Gain, in steps of 1/16384, range from 0 to (8 – 1/16384)
3.
Analog Gain selection
4.
Black level (offset) selection
a.
All colors channels
b.
Red color channel
c.
Green color channel
d.
Blue color channel
5.
Digital Black Level, in steps of 1, range from -1023 to 1023
6.
Analog Black Level, in steps of 1/256, range from -1.2 to 1.2
11.7
LUT control
The LUT should perform functionality such as gamma correction, it can be used to re-map the
camera linear output in different manner. Mostly to compensate for the non-linear scene emission.
Each index at the LUT corresponds to the pixel value and the LUT value at this index corresponds
to the value that the pixels should be re-mapped to.
𝑃(𝑥, 𝑦) = 𝐿𝑈𝑇[𝑃(𝑥, 𝑦)]
Where P(x,y) is the pixel at offset X in horizontal and Y in vertical.
Camera Features
