High Speed Camera User Guide
49
11.8.2
User Non-volatile Memory
Non-volatile memory is available for user usage. Data save to this memory space will not be erase
upon camera power-down.
5.
Execute an erase of the entire user memory on the camera
6.
Selection of the memory page for saving
7.
Execute a save to the selected memory page
Characteristics and restrictions:
1.
Up to 65536 bytes can be saved into camera's non-volatile memory.
2.
All data will be erased in 1 burst.
3.
Data can be saved in bursts of 256 bytes each time. All 256 should be filled either with valid
or padding data.
4.
If data is loaded before erase operation is performed (1 time for all data), this data may be
corrupted.
5.
Data can be read at any time. (It is best not to read non-volatile memory while camera is
streaming).
6.
The access to non-volatile memory will be performed via GeniCam interface:
Operation sequence.
The following function call sequence should be performed to achieve successful User Non-Volatile
new memory save:
Camera Features
