Komodo Frame Grabber User Guide
18
Video stream acquisition
Komodo is designed to acquire different video streams compliant with CoaXPress standard
1.0 over up to 4 CoaXPress links.
When connected to transmitting device, the frame grabber communicates with Camera
device to determine link parameters, such as data rate.
For different options please refer to Vision Point Application User Manual.
Auxiliary Input/Output signals
The auxiliary signal of Komodo board can be used to initiate on-board events, transmitted
to other devices or rerouted from other signals, such as CoaXPress triggers and GPIO’s.
Additionally, these auxiliary signals can be used to communicate with complex devices,
such as encoders, strobe controls and drive controls.
The GPIOs can be controlled from the Komodo API and be set as a trigger sources. The
API enables routing of any input to any output as well as to the CXP IO and Trigger lines.
Please see the API documentation for more information regarding the GPIO configuration.
The Komodo’s GPIO structure consists of 2 corresponding IO headers with 2.54 mm (100
th) pitch.
Installation and Configurations
