Is the swivel rod holder removable?
Yes, It easily comes out when the locking groove on the rod holder is lined up
with the notch in the base.
Is the rudder for the Nextgen 9 the same as the rudder for the Nextgen 10 Mk2 mk2 or the Nextgen 1+1?
The Rudder is different from the Nextgen 9 and Nextgen 10 to the Nextgen 10 Mk2 and the Nextgen 1+1.
What size cover do I need for the NextGen 10 MK2?
A 3m cover is best for the NextGen 10 MK2.
How can I stack the NextGen 10 MK2 with a smaller kayak?
The kayaks are stackable so you need to put the smaller Kayak upside down on the car
roof and then put the NextGen 10 MK2 kayak on top of the smaller kayak and tie them securely.
What are the holes on the multi-purpose centre console used for?
They are for quick mounting of the K2F rod holder and hardmounting accessories such as fishfinders.
What is the difference between the NextGen 10 and the NextGen 10 MK2?
The NextGen 10 Mk2 is 1cm wider and taller than the NextGen 10.
The NextGen 10 is 3Kg lighter compared to the NextGen 10.
The NextGen 10 Mk2 can support an extra 10 Kg compared to the NextGen 10.
The NextGen 10 Mk2 comes with an extra four tracks; two in the front and two in the rear.
The NextGen 10 Mk2 has two seat height adjustment levels
Higher seating is beneficial for sight fishing activities and more comfortable for the knees.
Lower seating lowers the kayak's centre of gravity which increases stability when paddling
or carrying heavy loads.
The NextGen 10 Mk2 has a rear storage hatch at an angle to allow long items such as fishing
rods or anchor poles to be stored within the kayak.
The NextGen 10 Mk2 has carry handles flush with the kayak body to help avoid hitting the handles
while paddling.
The NextGen 10 Mk2 has cleared out footwells for comfort whereas the NextGen 10 has moulded
footrests.
https://k2f.com.au/s/cfj
They can be found here
FAQ
What do HDPE, LDPE and LLDPE stand for?
Low-density polyethylene (LDPE) is softer and more flexible than HDPE. It also has a lower
melting point (115° C) and is more transparent. Compared to HDPE, it is more likely to crack
under stress.
Linear low-density polyethylene (LLDPE) is a copolymer of ethylene and another longer olefin,
Which is incorporated to improve properties such as tensile strength or resistance to
harsh environments.
High-density polyethylene (HDPE) is rigid and durable and offers greater chemical resistance.
Its higher melting point (135° C) allows it to withstand higher temperatures than LDPE. Its more
crystalline structure also results in greater strength. It also has greater opacity which results
in greater vibrancy and longer-lasting colour.
Summary of Contents for NEXTGEN10 MK2
Page 1: ......