Chapter 6 Standalone Manual Mode
Kaye HTR-420 User Manual
29
6.4
Test Tasks
Test tasks are containers for defined test conditions. They are helpful for recurring testing
processes, standardizing test sequences, and generating measurement logs.
All the required settings and configurations for the calibration of a test specimen are compiled in a
test task. The parameters of the testing task are saved and linked to the selected functions
The operational concept of the calibrator is based on pre-installed and self-defined test tasks.
They are a central component of the function and operation of the HTR-420 in
Standalone
mode.
The calibrator is shipped with functions and basic testing tasks defined in the factory internally
stored. These protected test tasks cannot be deleted nor edited. They serve as templates for your
own self-defined test tasks. You can define your own test tasks for different test sequences. These
test tasks are directly saved in the calibrator for ready access and activation.
From the
Standalone
main screen, the current test is displayed.
Current Test Task
Tap the
Current Test Task
window to go to “Select Test Task” screen.
Select Test Task:
Information on the selected test task is displayed
in the information box.
All the test tasks of the calibrator are displayed in
the selection list.
From the toolbar, you can accept the selected
test task, search for test tasks, or switch to
Manage Test Task
for
managing and
configuring the test tasks
.
Manage Test Task:
This window differs slightly from the
Select Test
Task
screen only by the functional elements
appearing in the toolbar.
The test tasks can be sorted, copied, deleted,
configured, or new ones created.
