6
S Ceiling cloth and flag
1
T Seat fixing nuts
8
U Flag pole fixed base
1
V
Upper suction pipe lower
fixing clamp
Φ51-70
2
W
Front protective fixing
screws
M8 * 12 bolts
4
X Tire dust cover
4
Y
Backrest cross bar fixing
screws
M8 * 16 bolts
4
Z
Fixing bushing for upper
intake pipe and upper cross
bar of backrest
Φ
10.1*20*H9
2
6. As shown in the picture, use tool
④
(14 #
wrench) to remove the hoop screws fixed
between the rear of the car and iron frame.
7.Raise the front body, use tool
⑰
(Needle
nose pliers) to remove the cable ties that fix
the shock absorber, and then use
⑭
(torque
wrench)
⑩
(13mm socket)
④
(14 # wrench) to
tighten N (M10 * 1.25 bolts*2, two M10 *
1.25 nuts*2) fixing screws (bolt in front, nut
in back, torque requirements 49-59 N·m).
